Quadra-Fire VOYA-GRAND-MBK Owner's Manual page 41

R
. e uri g i
1. nce you have the appliance in place and secured,
ceramic blanket. Detailed instructions are found on
ge 23 2 .
chimney mounting bar. Securely tighten the nuts.
teners are provided.
Attachment
Bar
5/16 Nuts
Figure .
May 23, 2013
e e i e i er
Figure
5/16 Bolts
F. r urr u
Standard Si e: 43 in. W
Large Si e: 51 in. W
1. Lay surround face down on a protected surface to pre-
vent scratching.
2. sing a 4 to 6 inches long Phillips head screw driver
-
. .
sheet metal screws on each side provided with the kit.
Figure .2.
as-
3. Lay the trim face down and place the corner brackets into
position.
brackets. Figure
5. Slide the assembled trim set over the surround set. and
then over the appliance matching the mounting tabs on
the side pieces with the slots on the appliance. Figure
.2.
alignment holes on the appliance top. Secure in place.
Figure .2.
7. se the strain relief in the surround side for blower cord
installation and use the cover plug to insert into the hole
where the blower cord is not installed.
Figure
Figure .3
7075-166C
ri i
31 in.
34 in.
.3.
Secure to
irebo ace
Mounting abs
Slide into Slots
on irebo ace
Strain Relief for
lower Cord and
Cover Plug for hole
in each side
.2
Corner Brackets
er
i
Page 41