Hull
Inspect hull for cracks or damage.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage propulsion unit.
Clean as necessary. If any obstruction
can not be removed, refer to an autho-
rized Sea-Doo dealer for servicing.
TYPICAL — INSPECT THESE AREAS
1. Water intake
2. Ride plate
Drain Plugs
Secure bilge drain plugs.
________
SAFETY INFORMATION
smo2011-001-003_a
TYPICAL
1. Drain plugs
2. Tighten
3. Untighten
WARNING
Ensure bilge drain plugs are prop-
erly secured prior to launching the
watercraft in water.
Battery
WARNING
Verify tightness of battery cables
to their posts and condition of bat-
tery retaining fasteners. Do not
charge or boost battery while in-
stalled in the watercraft.
The battery is located under the stor-
age bin in the front storage compart-
ment.
________
PRE-RIDE INSPECTION
29