Hdmi Device (Cable Box, Satellite Receiver, Dvd Player, Or Other Device); Standard Cable Box, Satellite Receiver, Or Other Device With S-Video - Mitsubishi Electric LT-40133 Owner's Manual

20
3. TV Connections
HDMI Device (Cable Box, Satellite
Receiver, DVD Player, or Other Device)
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel #2 to
the HDMI device output. HDMI devices provide video
and audio through the single cable.
Mitsubishi recommends you use category 2 HDMI
cables to connect HDMI 1.3 source devices. High-
speed category 2 cables bring you the full benefits of
Deep Color and x.v.Color. See chapter 1, "TV Overview,"
for more on HDMI cable types.
Figure 2. Connecting an HDMI device.
Note: HDMI inputs are
interoperability with other products certified by
Simplay™.
IMPORTANT
HDMI and Audio Signals
• Digital Surround Sound: The TV's HDMI
inputs can receive digital stereo audio
signals only. To hear digital surround
sound from an HDMI device, connect the
device's digital audio output directly to your
A/V receiver. See A/V receiver and HDMI
device Owner's Guides for instructions.
• A/V Receiver with HDMI. If your A/V
receiver has an HDMI input, use the audio
connections described in "A/V Receiver
(Sound System)" instead.
certified for proper
Standard Cable Box, Satellite Receiver,
or Other Device with S-Video
Required: S-Video cable and left/right analog stereo
audio cables.
1. Connect the cable from the outside cable or satel-
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver.
2. Connect an S-Video cable from S-VIDEO OUT on
the cable box or satellite receiver back panel to
INPUT S-VIDEO on the TV back panel #1.
3. Connect left (white) and right (red) audio cables
from AUDIO OUT on the cable box or satellite
receiver to INPUT AUDIO L (MONO) and R on the TV
back panel #1.
Note: Refer to the cable box or satellite receiver
Owner's Guide for cable or dish antenna con-
nections to the receiver.
Figure 3. Connecting a device with S-Video