Tv Front Panel - Mitsubishi Electric LT-40133 Owner's Manual

NetCommand for HDMI Devices (all models)
Some newer HDMI devices may be compatible with
the TV's NetCommand for HDMI feature. Compatible
devices can receive control signals through the HDMI
connection. The TV's remote control may be able to
operate some functions of these devices without any
further setup. See "HDMI Inputs" and "HDMI Cable
Categories" on page 12 for more information on HDMI.
See Appendix D for TV Remote programming informa-
tion.
Note: On models LT-40134, LT-46144, and LT-52144,
you can add commands using NetCommand IR emit-
ters and "Learning."
Front Panel Indicators
1. POWER/TIMER indicator. Lit when TV is
powered on; flashes when TV is powered off
and the auto-on TV Timer is set; flashes rapidly
(approx. 60 sec.) when TV is first plugged in to an
AC outlet.
2. STATUS indicator (off during normal TV operation);
indicates TV may need service.
POWER/TIMER Indicator
LED Color TV Condition
Standby condition.
None
TV is powered on.
Blue
TV powered off, auto-on timer is
Blue
set.
Blue
1. TV just plugged into AC outlet.
2. AC just restored after power failure.
3. TV rebooting after System Reset
used.
4. TV rebooting after power fluc-
tuation or receiving abnormal
digital signals from a digital
channel or digital device.
5. You have begun the procedure
to update software from an
authorized flash memory device.
STATUS Indicator
LED Color TV Condition
Normal TV on or standby condition.
None
TV may require service.
Red
1. Television Overview

TV Front Panel

Indicator Lights
Power and Status Lights
Lights (located on the front left) indicate whether the
TV is on or off, a timer is set, and the overall functional
status of the TV. See chapter 4, "TV Operation and
Features," for more information.
Off Steady On
Additional Information
Normal operation.
Normal operation.
Normal operation. TV can be turned on at any time.
Wait approximately one minute for blinking to stop before turning
on. Normal operation.
Additional Information
Normal operation.
Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in. See Appendix E.
If the LED is still on, contact your dealer or a Mitsubishi
Authorized Service Center. Go to www.mitsubishi-tv.com or call
1-800-332-2119 to receive Authorized Service Center information.
Side Panel
(Controls and
Inputs)
Remote
Control
Sensors
Slow Blinking Fast Blinking
9