Dvd Player With Component Video; Dvi Video Device; Dvd Player, Or Other Device) - Mitsubishi Electric LT-40133 Owner's Manual

22
3. TV Connections

DVD Player with Component Video

Component video cables and analog audio cables are
required.
1. Connect the component video cables from Y Pb Pr
VIDEO OUT on the back of the DVD player to the
COMPONENT INPUTS jacks on the TV back panel
#1, matching the green, blue, and red colored con-
nections.
2. Connect left (white) and right (red) stereo audio
cables from AUDIO OUT on the back of the DVD
player to COMPONENT INPUTS L (MONO) and R
on the TV back panel #1.
Figure 7. Connecting a DVD player with component
video
Note: To hear digital surround sound from your DVD
player, connect the audio output from the DVD
player directly to your digital A/V receiver.
IMPORTANT
See Appendix A for component video signal
compatibility information.
For digital audio connections to your A/V
receiver, see your DVD player and A/V receiver
Owner's Guides.
DVI Video Device (Cable Box, Satellite
Receiver, DVD Player, or Other Device)
Connect DVI devices (digital only) to the TV's HDMI
input jacks.
Analog stereo audio cables and a DVI-to-HDMI cable or
DVI/HDMI adapter and HDMI cable are required.
1. Connect the DVI-to-HDMI cable (recommended) or
HDMI cable with DVI/HDMI adapter from the DVI
device's back panel to the TV's HDMI jack (TV Back
Panel #2).
Note: If you are using a DVI/HDMI adapter, it is impor-
tant to connect the adapter to the DVI device for
best performance.
2. Connect a set of audio cables from AUDIO OUT
on the DVI device back panel to the PC/DVI AUDIO
INPUT on the TV back panel #1. Connect the red
cable to the R jack and the white cable to the L
(MONO) jack.
Note: The HDMI connection supports copy protection
(HDCP).
Some devices require connecting to an analog
input first, in order to view on-screen menus
and to select DVI as the ouput. Please review
your equipment instructions for DVI connectivity
and compatibility.
Figure 8. Connecting a digital DVI device