Assembly-Speaker-Box Removal; Assembly-Speaker-Box Disassembly - Mitsubishi Electric LT-55154 Service Manual

MODELS: LT-55154 / LT-40164 / LT-46164 / LT-55164 / LT-46265 / LT-55265
BEZEL Removal
1. VLP43++ Disconnect the SB connector
from the PWB-MAIN and release the wiring
harness from the taped locations leading to
the PWB-SBL.
2. Release the clips around the Bezel and
remove from the front.
3. VLP43++ Carefully feed the SBL wiring
harness from the back as the Bezel is be-
ing removed.
Note: Upon re-assembly be certain the wiring is
routed so it will not get caught in the chan-
nel of the Stand Mounting Bracket.
PWB-SBL Removal (VLP43++)
1. Remove the Bezel as described above.
Note: Use caution when removing the tape from
the wiring connector on the PWB-SBL.

ASSEMBLY-SPEAKER-BOX Removal

1. Remove screws (A).

ASSEMBLY-SPEAKER-BOX Disassembly

1. Remove the screws indicated on the Speaker Box by the arrows.
2. Separate the back from the front cabinet.
PWB-SBL
A
Page 10
SB