Viewing Camera Files; Jpeg Photos And The Usb Photo Port - Mitsubishi Electric LT-40133 Owner's Manual

34
4. TV Operation and Features

Viewing Camera Files

JPEG Photos and the USB Photo Port

1. Connect your digital camera or USB drive to the
USB Photo port on the side of the TV. If using a
camera, power it on and set it to playback mode.
The USB Photo menu
displays while files
are still being read.
Wait until you see the
completion message
on screen before
continuing.
Note: Some manufacturers' devices may be incompat-
ible with the TV. If the TV is unable to display your
photos, you can:
• Try transferring files to a different USB
device.
• Use the camera's composite video output
as described later in this chapter.
2. After files have been read, you can do the following
from the USB Photo menu:
USB Photo Menu Options
Start slide show.
Activate menu options. Highlight an icon and press
Display or close the
Main menu.
Display status for the
file source.
Select a different con-
nected device
Clear status display
or menu to show the
USB Photo menu
USB Photo menu
With the Slideshow icon high-
lighted, press or ENTER.
ENTER to:
• start the slide show
• display picture thumbnails
• open the Media Setup
submenu.
Press MENU.
Press INFO.
1. Press INPUT.
2. Highlight the icon for a dif-
ferent device.
3. Press ENTER.
Press EXIT.
JPEG Thumbnail Menu
Use these keys while viewing JPEG thumbnail images:
Keys for the JPEG Thumbnail Menu
Move the highlight from image to image.
FORMAT Rotate the thumbnail clockwise in 90˚
increments
Play the slide show starting with the high-
or
lighted thumbnail.
ENTER
Highlight the last thumbnail on the current
page.
Highlight the first thumbnail on the current
page.
Display the next or previous page of
CH/PAGE /
thumbnails.
EXIT Close the Thumbnail menu and display
the USB Photo menu.
MENU Close the Thumbnail menu and display
the Main menu.
INPUT Close the Thumbnail menu and display
the Input Selection menu.
Notes on Viewing JPEG Files
• Large files or high-capacity storage devices may take a
long time to display. The screen will be blank while files
are read.
• Use only one source device at a time.
• The TV ignores all commands while reading files. Wait
for the completion message before continuing.
IMPORTANT
Stop playback or change to a different TV input
before disconnecting from the USB photo port.