Removing The Developer; Figure 1 - Kyocera FS-1920 Service Manual

2FP/2FY/2FR

1-6-2 Removing the developer

(1) Removing the developer
CAUTIONS When if installing or removing the developer, do not let the magnet roller touch any part in the printer.
1. Open the top cover.
2. Remove the toner container.
3. Disconnect the developer connector.
4. Remove the developer from the printer while
sliding the developer lock lever frontwards.
Lock lever
1-6-2
Developer connector
Figure 1-6-1 Removing the developer
Developer
Developer