Installing The Optional Memory Card - Kyocera FS-1920 Service Manual

2FP/2FY/2FR
1-3-3 Installing the optional memory card (CompactFlash)
The main board of the printer is equipped with one
slot for memory card.
CAUTION
Take precautions that no foreign substances such as
metal chips or liquid get inside the printer during the
installation process. Operation of the printer during the
presence of a foreign substance may lead to fire or
electric shock.
WARNING
Turn the printer's power switch off. Unplug the printer's
power cable and disconnect the printer from the
computer or the network. Never insert or remove a
memory card while the printer power is ON.
Failure to turn the power switch OFF will immediately
halt the printer with a [Memory card err20] message
(this message may not always appear). It also could
result in any damage to the printer's electronic parts or
the memory card. Turn the power switch ON again to
restart the printer.
Procedure
1. Turn the power switch off.
2. Insert the memory card in the memory card slot at
the right bottom of the printer. Insert it face up,
connector end first. Push it in all the way.
1-3-10
Memory card
Figure 1-3-14 Inserting the memory card
Memory card
slot