Mounting The Camera To A Tripod - Sony HDC3300 Operation Manual

Bottom of the camera
Adjusting procedure
1
Raise the lever in the center of the shoulder pad to
unlock the shoulder pad.
2
Slide the shoulder pad backward or forward until it is
in the most convenient position.
3
Bring down the lever to lock the shoulder pad in the
selected position.

Mounting the Camera to a Tripod

Mount the camera to a tripod using a VCT-14 Tripod
Adaptor.
Caution
• Select an appropriate hole from among those at the
bottom of the tripod adaptor considering the balance of
the weight of the camera and the tripod adaptor. If an
inappropriate hole is selected, the camera may fall over.
• Check that the size of the selected hole matches that of
the screw of the tripod. If they do not match, the tripod
adaptor cannot be attached to the tripod securely.
Mounting procedure
1
Attach the tripod adaptor to the tripod and secure it
with the screw.
50
Preparations
Shoulder pad lock lever
1,3
2
Shoulder pad
2
Place the camera on the tripod adaptor, and slide
forward it along the groove of the tripod adaptor until
it clicks.
To remove the camera from the tripod adaptor
Hold down the red button and pull the lever in the direction
of the arrow.
Red button
Tripod adaptor
Tripod
Lever