Attaching The Cable Clamp Band (Supplied); Adjusting The Shoulder Pad Position - Sony HDC3300 Operation Manual

2
In the same manner as step 1, remove the viewfinder
shoe of the camera from the front-rear positioning
mechanism.
3
Using the two bolts (M4 × 8) and the washers removed
from the camera in step 2, attach the rotation
mechanism assembly of the BKW-401 to the camera.
Attaching the Cable Clamp Band
(Supplied)
You can secure the optical composite cable to the camera
by attaching the supplied cable clamp band.
1
Remove two 3B3 × 5 screws and a blind screw shown
in the figure below:
3B3
2
Attach the cable clamper and clamp band to the
camera using the supplied 3B3 × 10 screws.
3B3
Cable clamp band
Hexagon
socket bolts
(M4 × 8)

Adjusting the Shoulder Pad Position

You can shift the shoulder pad from its center position
(factory setting) backward by up to 10 mm (3/8 inch) or
forward by up to 25 mm (1 inch). This adjustment helps
you get the best balance for shooting with the camcorder
on your shoulder.
Blind screw
×
5 screws
×
10 screws
Cable clamper
Optical
composite cable
49
Preparations