Mounting The Camera To A Tripod - Sony F23 Operation Manual

1
V F 1
2
C T R L
Note
When the L handle is attached to the camera head, the
attaching condition may be limited, owing to the
viewfinder position and the rotating position of the hood.
When the second viewfinder is required
Connect it to the VF2 connector.
Using the menus, you can specify the display condition
independently of the viewfinder connected to the VF1
connector.
To detach the viewfinder
Loosen the viewfinder positioning ring, pull on the
viewfinder stopper, then pull out the viewfinder by sliding
it in the direction opposite that when attaching.
22

Mounting the Camera to a Tripod

2-5 Mounting the Camera
to a Tripod
Two tripod receptacles (for
provided on the bottom of the camera head.
Tripod receptacles
Notes
• Select an appropriate hole, considering the balance of the
weight of the camera. If an inappropriate hole is selected,
the camera may fall over.
• Check that the size of the selected hole matches that of
the screw of the tripod. If they do not match, the camera
cannot be attached to the tripod securely.
3
/ " camera screws) are
8