Operation Panel - Sony HDC3300 Operation Manual

Operation panel

SY type:
For SY (USA, Canada, and other countries) and JN4 (East Asia) models (for NTSC areas)
a INTERCOM1 and INTERCOM2 controls and switches
PGM1 control
PGM2 control
PGM1 PGM2
LEVEL MIC
PROD
INCOM
REAR ON
FRONT OFF ENG
INTERCOM 1
Line select switch
INCOM level control
LEVEL/MIC switch
a INTERCOM 1 and INTERCOM 2 controls and
switches
There are PGM1 and 2 controls incorporated with a line
select switch, a LEVEL/MIC switch, and INCOM level
control each for intercom line 1 and 2.
PGM1 (program 1) control
Adjust the audio reception level of program 1.
PGM2 (program 2) control
Adjust the audio reception level of program 2.
LEVEL/MIC switch
REAR/ON: The intercom headset microphone is turned
on. The intercom audio reception level is adjusted with
the INCOM level control.
REAR/OFF: The intercom headset microphone is turned
off. The intercom audio reception level is adjusted with
the INCOM level control.
FRONT/OFF: The intercom headset microphone is
turned off. The intercom audio reception level is
adjusted with the INTERCOM LEVEL control on the
front of the camera.
INCOM level control
Adjust the intercom audio reception level.
Line select switch
Select the intercom line.
PROD: Producer line
ENG: Engineer line
PGM1 PGM2
LEVEL MIC
PROD
INCOM
REAR ON
FRONT OFF ENG
INTERCOM 2
b RET1 button and select switch
c RET2 button and select switch
RET1 2 3 RET2
1
4
PGM1 PGM2 PGM1
LEVEL MIC LEVEL MIC
PROD
INCOM
REAR ON REAR
FRONT OFF ENG FRONT OFF
INTERCOM 1 INTERCOM 2
b RET 1 (return video 1) button and select switch
The return video signal selected with the switch is
displayed on the viewfinder screen while the button is
pressed.
c RET 2 (return video 2) button and select switch
When other return video systems are used in addition to
return video 1, you can monitor the signal selected with the
switch on the viewfinder screen while pressing the button.
Note
The RET 1 button has priority over the RET 2 button if
both buttons are pressed.
d LIGHT switch
Set to ON to illuminate the operation panel.
d LIGHT switch
2 3
LIGHT
1
4
ON
OFF
PGM2
PROD
INCOM
ON
ENG
Locations and Functions of Parts
43