Connecting The Vp-427A - Kramer VP-427A User Manual

4

Connecting the VP-427A

i
To connect the VP-427A as illustrated in the example in
1. Connect the output from an HDBaseT transmitter (for example, a TP-582T)
to the HDBT IN RJ-45 connector.
2. Connect the AUDIO OUT 3.5mm mini jack connector to an unbalanced
stereo audio acceptor (for example, an amplifier).
3. Connect the HDMI OUT connector to an HDMI acceptor (for example, a
display).
4. Connect an IR receiver to the IR IN 3.5mm mini jack.
5. Connect the IR OUT 3.5mm mini jack to an IR emitter.
6. Connect the RS-232 9-pin D-sub connector to an RS-232 port (for example,
a display).
7. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
6
Always switch off the power to each device before connecting it to your
VP-427A. After connecting your VP-427A, connect its power and then
switch on the power to each device.
Figure 2:
Figure 2).
VP-427A - Connecting the VP-427A