Controller Features & Settings - Haier HSU09VHGDB-W User Manual

Remote Controller
2
3
4
7
8
10
13
15
16
1 Power Button
Press the ON/OFF button on the remote control to start
the unit.
2 QUIET Button
This function may be used when silence is needed for rest or
reading. Press the QUIET
will display the QUIET icon and switch the unit to the
quiet function. Press the QUIET
this function.
Note:
Running the unit in QUIET mode for a long period of time
may cause the room temperature to not reach the set
temperature. If this occurs, cancel QUIET mode and set the
fan speed to a higher setting.
PAGE 2
1
5
6
9
11
12
14
17
button, the remote control
button again to cancel
CONTROLLER FEATURES & SETTINGS
3 COOL Button
In COOL mode, the unit operates in cooling. When FAN is
set to AUTO, the air conditioner automatically adjusts the
fan speed according to room temperature. The
displayed during COOL mode.
HEAT Button
4
In HEAT mode, warm air will blow out after a short period of
the time due to cold-air prevention function. When FAN is
set to AUTO, the air conditioner automatically adjusts the
fan speed according to room temperature. The
displayed during HEAT mode.
5 DRY Button
DRY mode is used to reduce humidity. In DRY mode, when
room temperature becomes lower than temp. setting +2°F,
unit will run intermittently at LOW speed regardless of FAN
setting. The will be displayed during DRY mode.
Temperature +/- Buttons
6
Temp + Every time the button is pressed, the temperature
setting increases.
Temp - Every time the button is pressed, temperature
setting decreases.
The operating temperature range is 60°F-86°F (16°C-30°C).
AUTO Button
7
Under the mode of auto operation, the air conditioner will
automatically select Cool or Heat operation according to
room temperature. When FAN is set to AUTO the air condi-
tioner automatically adjusts the fan speed according to room
temperature. The will be displayed during AUTO mode.
8 FAN Button
Fan speed selection
Press the FAN button. For each press, fan speed
changes as follows:
Remote control:
Display
circulated
LOW MED HI AUTO
The air conditioner fan will run according to the displayed fan
speed.
When FAN is set to AUTO, the air conditioner automatically
adjusts the fan speed according to room temperature.
9 Louver SWING Button
Air Flow Direction Adjustment
1. Status display of air flow
COOL/DRY:
will be
will be