Capturing The Currently Displayed Image <Scene Capture Function; Viewing Preceding Recorded Images <Instant Replay Function; Displaying The Camera Window Panel; Starting Alarm Recording Manually <Net Alarm Recording Function - Mitsubishi Electric DX-PC55E Operation Manual

4.10.2 Capturing the currently displayed image <Scene capture function>
When an important scene appears on the camera window, you can capture the scene by clicking the
the right of the window.
The captured image is saved in the [cap_img] folder in the My Document folder by default. You can specify other
folder for saving the captured image using the Camera Window tab on the Option window (
38). You can select the format to save the file, BMP or JPEG.
You can select to display or hide this button using the Camera Window tab on the Option window (
on page 38). When this button is hidden, the response to the screen operation gets slightly faster.
4.10.3 Viewing preceding recorded images <Instant replay function>
By clicking the button at the right of the camera window during live image viewing, you can display the image
that was recorded a specified time before. (The preceding image is displayed still.)
To specify the preceding time, use the Camera Window tab on the Option window (
You can select to display or hide this button using the Camera Window tab on the Option window (
on page 38). When this button is hidden, the response to the screen operation gets slightly faster.
Notice
• The instant replay function calls recorded images from the recorder. Therefore, when the recorder has no
images that were recorded the specified time before, no images are displayed. When images have been
recorded sparsely in the recorder, this function may call an image that is far from the specified time.

4.10.4 Displaying the camera window panel

Click the button at the right of the camera window to display the camera window panel.
You can select to display or hide this button using the Camera Window tab on the Option window (
on page 38). When this button is hidden, the response to the screen operation gets slightly faster.
4.10.5 Starting alarm recording manually <NET alarm recording function>
You can start alarm recording by clicking the
live image viewing.
In this case, the alarm recording duration set in the recorder is applied.
You can select to display or hide this button using the Camera Window tab on the Option window (
on page 38). When this button is hidden, the response to the screen operation gets slightly faster.
Notice
• This button is effective only to the recorders supporting the NET alarm recording function, such as DX-TL5000
series.

4.10.6 Bookmarking the currently displayed recorded image

During playback of recorded images, you can add a bookmark to an image for later reviewing.
To add a bookmark, display the camera window panel (
To display an image having a bookmark, use the bookmark search function (
Bookmarks are saved for each recorder.
In addition, you can use the AB bookmark function. This function repeats playback between points A and B
registered as bookmarks for each camera.
To register points A and B, click [A] and [B] in the [Bookmark] menu on the camera window panel. For A-B repeat
playback, put a checkmark to [Repeat between A and B] in the [Bookmark] menu. When you start playback,
recorded images between A and B are played back repeatedly.
button if you find an important scene to be alarm-recorded during
see 3.7 on page 12) and click the [Bookmark] button.
– 28 –
button at
see 4.18.3 on page
see 4.18.3
see 4.18.3 on page 38).
see 4.18.3
see 4.18.3
see 4.18.3
see 4.7.3 on page 22).