Table of Contents
Advertisement
The Elite Directional Wired Tabletop Boundary
Microphones
The Elite Directional Wired Tabletop Boundary Microphone, shown below, is
designed to provide optimum coverage when placed on a conference room table
in front of one to three people.
1. Bottom door latch — replace the bottom cover for permanent installations
using this latch.
2. Audio wire — connect the microphone to the DSP or other audio equipment
using this wire.
3. Button – Local mute control, or pulling the external control line to ground
when pressed.
To use the Elite Directional Tabletop Microphone, it should be placed on the
table with the metal screen facing toward the users, trying to keep the
microphone 2 to 6 feet (0.6 to 2m) from the target people. The pick-up pattern
for this directional microphone is approximately +/- 65º to either side of
directly in front of the microphone.
It is always better to place a microphone as close to meeting participants as
possible, while avoiding placing the microphone where it might be blocked by
equipment or paperwork. Do not place microphones too close to an audio or
2
3
1
14
Advertisement
Table of Contents
