Ipv6 Neighbor Setup - ZyXEL Communications xg3700 series User Manual

Hide thumbs Also See for xg3700 series:
Table of Contents

Advertisement

Table 32 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup (continued)
LABEL
Preferred Lifetime
Delete
Cancel

6.9.10 IPv6 Neighbor Setup

Use this screen to create a static IPv6 neighbor entry in the Switch's IPv6 neighbor table to store
the neighbor information permanently. Click the link next to IPv6 Neighbor Setup in the IPv6
Configuration screen to display the screen as shown next.
Figure 53 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Setup
The following table describes the labels in this screen.
Table 33 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Setup
LABEL
Interface Type
Interface ID
Neighbor Address
MAC
Add
Chapter 6 Basic Setting
DESCRIPTION
This field displays the preferred lifetime of an IPv6 address generated from the prefix.
Check the entry(ies) that you want to remove in the Delete column and then click
Delete to remove the selected entry(ies) from the summary table.
Click Cancel to clear the Delete check boxes.
DESCRIPTION
Select the type of IPv6 interface for which you want to configure. The Switch supports
the VLAN interface type for IPv6 at the time of writing.
Specify a unique identification number (from 1 to 4094) for the interface.
Note: A static IPv6 neighbor entry displays in the Management > Neighbor Table
screen only when the interface ID is also created in the Basic Setup > Interface
Setup screen.
Note: To have IPv6 function properly, you should configure a static VLAN with the same
ID number in the Advanced Setup > VLAN screens.
Specify the IPv6 address of the neighboring device which can be reached through the
interface.
Specify the MAC address of the neighboring device which can be reached through the
interface.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the nonvolatile memory when you are done configuring.
GS3700/XGS3700 Series User's Guide
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs3700 seriesXgs4600 series

Table of Contents