Mounting Grille Facia Panel - AGA marvel M60CFWR-SS Installation, Operation And Maintenance Instructions

Mounting grille facia panel for model
M72CFWR-WP:
Cut the facia panel to the size shown in Figure 26. Drill the
three facia bracket screw pilot holes in the back side of the
facia panel as noted in Figure 26. Fasten the three facia
brackets to the back side of the facia panel with 3 of the
screws provided. See Figure 27.
Align the facia brackets so they are parallel to the short
edges of the facia panel and drill the remaining 3 bracket
holes using the holes in the facia brackets as guides.
Secure the bottom of the brackets with the 3 remaining
screws.
The facia panel may now be mounted to the grille back.
CAUTION
!
When cutting the facia panel for the grille do not make
it larger than the size noted in Figure 26. Air flow to the con-
denser in the power module would be compromised. Grille
facia panels must not exceed 20 pounds (9.1kg), panels
weighing more could cause product damage. Do NOT use
glass, mirrors, granite or similar heavy materials for panels.
CUSTOM GRILLE FACIA AND DOOR PANELS
Facia Diagram for 72" Wide Models:
27
7 ⁄ "
3
8
(68.8cm)
(18.7cm)
1 ⁄ "
1
8
(2.9cm)
MATERIAL
Hardwood
Softwood
Facia panel-
Screw 3
required-
Drill bottom 3 holes
for mounting brack-
ets and secure with
remaining 3 screws.-
21
69"
(175.3cm)
⁄ " 27 ⁄ "
3 3
32 32
(68.8cm)
Figure 26
Drill 3 holes, see Table B.
HOLE SIZE
⁄ " (3.2mm)
1
8
⁄ " (2.8mm)
7
64
Table B
-Facia bracket
Figure 27
8 ⁄ "
3
4
(22.2cm)