Leveling the unit:
Unit MUST be installed level in all planes, on a floor that is
strong enough to support a fully loaded freezer. See
Figure 14.
This unit is equipped with front and rear rollers. Rollers will
aid during installation. Rear rollers are adjustable from the
front of the unit. Total adjustment is +
ing bolt with a
⁄
" wrench clockwise to raise cabinet and
7
16
counterclockwise to lower cabinet. See Figure 15.
NOTE
All four front leveling legs must be adjusted to the floor for
leveling and to prevent the unit from rolling during use. See
Figure 15.
Front
leveling
leg-
LEVELING THE UNIT
⁄
, -
⁄
. Turn adjust-
5
5
16
16
-Rear Roller Adjustment Bolt
(Use
⁄
open end wrench or
7
16
socket and ratchet)-
Figure 15
13
Figure 14
-Both front leveling legs must be
adjusted to floor after leveling,
for each unit