Operation - Clas Ohlson ECA806N-800-UK User Manual

Features
5
6
7
8
1. Lid
2. On/off switch
3. Handle
4. Motor
5. Tube port
6. Tube adaptor
7. Container
8. Suction tube

Operation

1. Open the draw latch (12) which fastens the lid (1) onto the container (7) and then remove
the components from inside the container.
2. Pass the pre-filter over the cartridge filter.
3. Push the tube adaptor (6) into the tube port (5) on the side of the container and lock it in place by
twisting it clockwise. When attached, the arrow on the adaptor should point upwards.
4. Place the lid onto the container and lock it using the draw latch.
5. Plug in the mains lead and switch the on/off switch (2) to I to turn the motor on.
Note: Do not plug the ash vacuum cleaner in until it is
to be used. Unplug the ash vacuum cleaner after use.
4 3 2 1
12
11
10
9
9. Nozzle connection
10. Nozzle
11. Mains lead
12. Over-centre draw latch
13. Pre-filter
14. Cartridge filter
15. Filter lid
16. Wing nut
4
13
14
15
16