Setting Up The Reader; Select Interface - Usb Interface - Datalogic Gryphon GFS4 series Quick Reference Manual

Setting Up the Reader

Select Interface - USB Interface

The reader (GFS4170 model only) attaches directly to a USB host or a
powered USB hub, and is powered by it. No additional power supply is
required. The reader auto-detects the USB and defaults to the HID key-
board interface.
To simulate a Keyboard, scan the bar code below:
To simulate an RS-232 Standard Interface scan the bar code below:
IMPORTANT
6
Interface Selection: USB-KBD (GFS4170 model only )
Interface Selection: USB-COM (GFS4170 Model only)
Download the correct USB COM driver from:
http://www.datalogic.com.
Setting Up the Reader
Gryphon™ GFS4XXX