Programming; Operating Modes - Datalogic Gryphon GFS4 series Quick Reference Manual

Fixed mount linear imager bar code reader

Hide thumbs Also See for Gryphon GFS4 series:

Table of Contents

Programming

For your convenience, this guide includes the programming bar codes re-

quired to configure the reader.

If you aren't sure what programming options are in your reader, or you've

changed some options and want the factory settings restored, scan the bar

code below:

Restore Default Settings

The reader can operate in one of several scanning modes:

Scanning is activated when the button is pushed or through an

On Line —

external trigger (GFS4150-9 only).

Scanning is continually on.

Automatic —

Scanning is turned on automatically when an

Automatic (Object Sense) —

item is placed in reader's field of view.

For any selectable scanning mode, performance

Strobe Exposure Mode —

on moving bar codes can be improved by flashing the scanner's lighting

(strobe mode). The scanner strobes at a very high frequency, so the change

in lighting may not be apparent. When enabled, the scanner can read

codes moving at up to 1m/sec, depending on the bar size and direction the

code is moving.

Gryphon™ GFS4XXX

Table of Contents