Table of Contents
Advertisement
For example, if you select Red and set its value at 0, only the saturation of pure red
will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a
setting of "0" removes that color from the image entirely. If the saturation is too high, that color will be
overpowering and unrealistic.
6.
Press
. The contrast level of the primary color you select will be affected. Every
adjustment made will reflect to the image immediately.
7.
Repeat steps 3 to 6 for other color adjustments.
8.
Make sure you have made all of the desired adjustments.
9.
Press MENU/EXIT to exit and save the settings.
Resetting current or all picture modes
1.
Go to the PICTURE menu and highlight Reset Picture Setting.
2.
Press MODE/ENTER and press
•
•
Setting the presentation timer
Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1.
Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press
MODE/ENTER to display the Presentation Timer page.
2.
Highlight Timer Period and decide the time period by pressing
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes
in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3.
Press
on the screen by press
Selection
Always
3 min/2 min/1 min
Never
4.
Press
5.
Press
direction by pressing
Selection
Count Up
Count Down
6.
To activate the presentation timer, press
press MODE/ENTER.
30
Operation
to highlight Gain and adjust its values to your preference by pressing
Current: returns current picture mode to the factory preset settings.
All: returns all picture modes to the factory preset settings.
to highlight Timer Display and choose if you want the timer to show up
ing
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 3/2/1 minute(s).
Hides the timer throughout the presentation time.
to highlight Timer Position and set the timer position by pressing
Top-Left
Bottom-Left
to highlight Timer Counting Direction and select your desired counting
/
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
/
to select Current or All.
/
.
Top-Right
.
and press
/
. The length
Bottom-Right
/
to highlight On and
/
/
.
Advertisement
Table of Contents
