Release; Mobile Extension; Using The Line Interface Module (5224 Ip Phone Only) - Mitel 5212 IP Phone User Manual

Release

Release lets you disconnect from an attempted Call Transfer or Conference
Call without hanging up the handset. Release is useful when you encounter a
busy or unavailable party.
To release from an attempted transfer or conference call:
Press the Release feature key or the Release softkey.

Mobile Extension

Mitel Mobile Extension is a software solution that enables you to twin your
desk phone with an external PSTN-connected phone (your cell phone, for
example). Calls arriving at the desk phone ring the cell phone
simultaneously, until one or the other is answered, or if unanswered, are
forwarded to voice mail. For information about configuring Mobile Extension
on your Mitel IP device, refer to the Mobile Extension Quick Reference Guide
available at www. mitel.com or contact your Administrator.
USING THE LINE INTERFACE MODULE (5224 IP
PHONE ONLY)
5224 IP Phones support the Mitel Line Interface Module. The Line Interface
Module allows you to make and receive calls over an analog line (referred to
as the Line Interface Module line) connected to your phone, and operates in
either of the following two modes (as determined by your System
Administrator):
Line Interface Module mode: your phone allows you to use the Line
Interface Module line at any time.
Failover Mode: you can use the Line Interface Module line only when the
IP connection has failed.
Note: Handsfree and on-hook dialing are not supported on the Line
Interface Module line.
-49-