Call Forward; To Program Call Forward - Mitel 5212 IP Phone User Manual

Call Forward

Call Forward lets you redirect incoming calls to an alternate number.You can
select one of the following forwarding options:
Always redirects all incoming calls regardless of the state of your
telephone.
B–Int redirects internal calls when your telephone is busy.
B–EXt redirects external calls when your telephone is busy.
NA–Int redirects internal calls after several rings if you don't answer.
NA–Ext redirects external calls after several rings if you don't answer.
Note: For information about "I'm Here?", see Call Forward – Remote.

To program Call Forward:

1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the Next softkey until the type of Call Forward that you want
to set up appears (see above).
5. On a 5224 IP Phone only, press the Review softkey.
6. If a number is already programmed, press * or the Change softkey .
7. Press * or the Program softkey .
8. Dial the destination number.
If you make an error while dialing, press * or the <— softkey to correct
errors.
9. Press ( DOWN ) or the Save softkey.
-24-