Teac CR-H101DAB Reference Manual page 26

3
Press the play/pause (y/9) button to start program
playback.
NOTE
To start program playback again after stopping, press the PROGRAM
button and then the play/pause (y/9) button.
Adding tracks to the program
1
Press the PROGRAM button.
MEM and the track number blink.
2
Select a track and press the PROGRAM button to add
it to the program.
o Repeat to add more tracks as desired.
3
Press the play/pause (y/9) button to start program
playback.
Removing all tracks from the program
1
When stopped, press and hold the CLEAR button.
2
When "Program clear?" appears, press the SELECT but-
ton to remove all tracks from the program.
Display
CD
example
Program clear?
To cancel the operation, press the stop (8) or CLEAR button.
26
Listening to CDs (continued)
STOP