Teac CR-H101DAB Reference Manual page 19

On/off timer
The unit can turn on/off (standby) at a set time.
o Confirm that the unit's clock is set correctly in advance.
o Use the included remote control to set the timer.
Setting the on/off time
1
Press the TIMER button.
2
Press a direction (l/;) button to show
"2.Setting", and press the SELECT button.
Timer MENU
< 2.Setting
3
Set the time to turn the unit on.
The hour position blinks. Use the direction (k/j)
buttons to set the hour of the on time and press the
SELECT button. Next, the minute position blinks. Set it
in the same manner.
Display
On Time
example
AM 07:00
4
Set the time to turn the unit off (standby).
Display
Off Time
example
AM 08:00
5
Select the playback source.
Use the direction (k/j) buttons to select the play-
back source (CD or TUNER) and press the SELECT
button.
Display
Select source
example
CD
o If you select CD, load a CD before putting the unit
in standby.
6
Set that playback volume.
Use the direction (k/j) buttons to set the volume
and press the SELECT button.
Display
Select volume
example
Volume 23
7
Press the TIMER button to complete mak-
ing settings.
Be sure to set the Timer ON/OFF setting to ON to make
the unit turn on/off at the set times.
Turning the timer function on/off
1
Press the TIMER button.
o When the unit is at its factory default settings
before on and off times have been set, if you press
the TIMER button, "First Timer Set" will appear on
the display. You must set these before proceeding.
>
2
Press a direction (l/;) button to show
"1.ON/OFF", and press the SELECT button.
3
Press a direction (k/j) button to turn
the timer on or off and press the SELECT
button.
Display
example
4
Press the TIMER button to complete mak-
ing settings.
5
Press the STANDBY/ON (¤) button to put
the unit into standby.
o When the timer is set to ON, "T" will be shown at
the bottom left of the display when the unit is put
in standby (page 7).
o If the unit is already on, the timer will not function
at the scheduled times. Always put the unit into
standby to enable the timer to function.
o If the playback source is CD, but no CD is loaded,
the FM radio will play instead.
Timer MENU
< 1.ON/OFF
Timer MENU
Timer ON
>
19