Teac CR-H101DAB Reference Manual page 18

Upconversion
You can use the upconversion function with digital input (USB, Bluetooth,
CD, OPTICAL).
Press the UPCONVERT button on the remote control to enable the upcon-
version function. The icon will appear on the display.
Input sampling frequencies and sampling frequencies after
upconversion
Input sampling frequency
44.1 kHz
48 kHz
88.2 kHz
96 kHz
176.4 kHz
192 kHz
HR loudness
Press the remote control LOUDNESS button to turn low-frequency empha-
sis on and off. When on, the icon appears on the display.
Since this uses high-resolution (192kHz/24-bit) digital audio processing, it
can enhance low frequencies without degrading the audio quality.
Muting playback
If you want to temporarily mute the volume of this unit, press the MUTE
button on the remote control.
"MUTING" appears on the display when muted.
Display
CD
example
Press the MUTE button on the remote control again to return to the previ-
ous volume level.
o Muting will stop if you change the playback source or use the VOLUME
knob or remote control VOLUME buttons (−/+).
Dimmer
Press the remote control DIMMER button to cycle through display bright-
ness levels.
Bright
o This setting is retained when the unit is in standby.
18
Basic operation (continued)
Sampling frequency after upconversion
88.2 kHz
96 kHz
176.4 kHz
192 kHz
176.4 kHz
192 kHz
PLAY
MUTING
Dim Unlit