Selecting Presets - Teac CR-H101DAB Reference Manual

Setting presets automatically
The unit can automatically search for stations that it can receive and assign
them to preset numbers.
Press and hold the PROGRAM button.
The unit will search for stations from the lowest receivable frequency to the
highest and assign them to preset numbers.
o After 20 presets have been assigned, "Full" will blink on the display and
automatic preset assignment will stop.

Selecting presets

Use the direction (k/j) buttons to change the preset number.
Display
FM
example
P03 87.5MHz
Preset number
Selecting presets using the main unit
Press the play/pause (7/9) button to switch between preset selection
and frequency selection.
Press the play/pause (7/9) button to show a preset number on the dis-
play, and use the skip (.//) buttons to change the preset number.
o When a preset number is not shown, you can use the skip (.//)
buttons to change the reception frequency.
28
Listening to FM radio (continued)