Message List - Teac CR-H101DAB Reference Manual

Operation messages
No Disc
Reading
EJECT
No Signal
Connected
Fs: *** kHz
AUTO POWER SAVE
Error messages
Disc Error
Not Support
OVER LOAD

Message list

No disc has been loaded.
A disc is being read.
A disc is being ejected.
The USB/OPTICAL input is not receiving an input signal.
The USB input is connected to a computer.
This shows the sampling frequency (Fs) of the track playing through the USB or OPTICAL input.
This appears 30 seconds before the automatic power saving function puts the unit into
standby.
The loaded disc has a scratch or other defect or it does not comply with standards.
Playback of the loaded disc is not supported.
A problem occurred with speaker output. Turn off the power and check the connections.
39