Program Playback - Teac CR-H101DAB Reference Manual

Program playback

Program playback is only possible with audio CDs.
Any of the following operations will clear all the tracks from the program.
o Ejecting the disc
o Using the STANDBY/ON button on the unit to put it into standby
Using program playback
1
Press the PROGRAM button.
MEM and the track number blink.
o Press when stopped.
2
Use the skip (.//) buttons to select a track and
press the SELECT button to add it to the program.
o Repeat to add more tracks as desired.
o You can also press the PROGRAM button to add a track.
3
Press the play/pause (y/9) button to start program
playback.
Checking and changing the program
1
Press the PROGRAM button.
MEM and the playback order number blink.
Display
CD
example
Track number
2
Use the skip (. // ) buttons to change the
playback order number shown and check the track
number.
Changing the program
1) Show the playback order number of the track that you want to
change.
2) Press the PROGRAM button.
3) Select a track and press the PROGRAM button to add it to the
program in place of the original track.
Removing a track from the program
1) Show the playback order number of the track that you want to
remove.
2) Press the CLEAR button.
Continued on the next page
MEM STOP
01 P-01
Playback order number
e
Example display
CD MEM STOP
01 P-01
Track number
Playback order number
25