Advertisement
5
38
34
FIGURE 4
STEP 4:
• Assemble four 3/4 X 4" PIVOT SHAFTS (15) to the MAIN & SECONDARY PIVOT ARMS (4 & 5) as shown in FIGURE 4.
• SECURELY assemble the MAIN & SECONDARY PIVOT ARMS (4 & 5) to the LEG PRESS FRAME (2) using four RH CAPS (38),
two 3/8 X 117mm BOLTS (30), four 3/8" SAE WASHERS (35), four 3/8" RH WASHERS (36) and two 3/8" LOW HEIGHT LOCK
NUTS (34) as shown in FIGURE 4. (NOTE: Make sure the MAIN PIVOT ARM is assembled as shown.)
FIGURE 5
STEP 5:
• SECURELY assemble the FOOT PLATE (6) to the MAIN & SECONDARY PIVOT ARMS (4 & 5) using four RH CAPS (38), two 3/8 X
117mm BOLTS (30), four 3/8" SAE WASHERS (35), four 3/8" RH WASHERS (36), and two 3/8" LOW HEIGHT LOCK NUTS (34) as
shown in FIGURE 5.
15
4
1"
13"
35
36
3/8 X 117mm 30
34
5
4
2
6
36
35
3/8 X 117mm 30
7
38
Advertisement
