Advertisement
STEP 1:
• LOOSELY assemble the BASE (7) to the LEG PRESS FRAME (2) and TOWER (1) using eight RH CAPS (38), two 3/8 X 117mm
BOLTS (30), two 3/8 X 90mm BOLTS (29), eight 3/8" SAE WASHERS (35), eight 3/8" RH WASHERS (36) and four 3/8" LOW
HEIGHT LOCK NUTS (34) as shown in FIGURE 1.
• LOOSELY assemble the UPPER SUPPORT (8) to the LEG PRESS FRAME (2) and TOWER (1) using eight RH CAPS (38), four 3/8 X 67mm
BOLTS (27), eight 3/8" SAE WASHERS (35), eight 3/8" RH WASHERS (36) and four 3/8" LOW HEIGHT LOCK NUTS (34) as shown
in FIGURE 1.
27 3/8 X 67mm
2
34
1
8
29 3/8 X 90mm
7
36
35
3/8 X 117mm 30
5
27 3/8 X 67mm
38
FIGURE 1
Advertisement
