Advertisement
FIGURE 16
42
43
STEP 16:
• SECURELY assemble the TOP SHROUD (40) to the TOWER (1) using two 3/8 X 25mm BUTTON HEAD BOLTS (31) and two 3/8"
BLACK FLAT WASHERS (33) as shown above.
• SECURELY assemble the FRONT SHROUD (41) and the REAR SHROUD (42) to the TOWER (1) using twelve 3/8 X 90mm BUTTON
HEAD BOLTS (32), twenty-four 3/8" BLACK FLAT WASHERS (33) and twelve 3/8" ACORN NUTS (43) as shown above.
Thank you for purchasing the LifeFitness FIT SERIES LEG PRESS/CALF. If unsure of proper use of
equipment, call your local LifeFitness distributor or call the LifeFitness customer service department at
31 3/8 X 25mm BUTTON HEAD
40
33
1
41
(800) 351-3737.
32 3/8 X 90mm BUTTON HEAD
SERIAL # LOCATION
16
Advertisement
