Electrical Components; Fuel For Air Top Evo 40/55 B (Gasoline); Fuel For Air Top Evo 40/55 D (Diesel/Heating Oil) - Webasto Air Top Evo 40 Installation & Operation Manual

Air Top Evo 40/55 Technical Data
The technical data apply under the following conditions:
- Ambient temperature: +20
°C
- Geodetic height: 0 m above sea level
- Rated voltage
The standard tolerances of ±10 % for heaters shall apply if no limits are specified
.
The values in brackets apply for the extended heating capacity (boost function) that is activated temporarily during
each start.

12.2 Electrical Components:

Control unit, motor, metering pump, lamp in the timer and ceramic glow pin / flame monitor are designed for either 12
or 24 Volt.

12.3 Fuel for Air Top EVO 40/55 B (Gasoline):

The fuel specified by the vehicle manufacturer must be used.

12.4 Fuel for Air Top EVO 40/55 D (Diesel/Heating Oil):

The diesel fuel specified by the vehicle manufacturer must be used. Heating oil may also be used as long as it complies
to the normal quality available on the North American market.
We know of no negative influences due to additives.
If fuel is extracted from the vehicle's tank, follow the additive instructions issued by the vehicle manufacturer.
If you change to low-temperature fuel, the heater must be operated for approx. 20 minutes so that the fuel system is
filled with the new fuel.
The Air Top EVO 40/55 heater is also licensed for use with PME (bio-diesel), which complies with DIN EN 14214.
www.webasto.us 35 Webasto Thermo & Comfort N.A., Inc.