C
H A P T E R
4.1 WPA-1000 Config
Use this screen to configure the settings on your WPA-1000.
Figure 10 Device Setup > WPA-1000 Config
The table below describes the labels on the screen.
Table 6 Device Setup > WPA-1000 Config
LABEL
WPA-1000 Setup
Device Name
Resolution
Login Code
Send
Cancel
4.2 Change Password
Use this screen to change the administrator's password.
WPA-1000 User's Guide
DESCRIPTION
Set your own device name for your device. The default is WPA-1000.
Your WPA-1000 supports 1024*768 resolution only at the time of writing.
The login code is a password that allows a meeting participant access to the
WPA-1000 utility in order to show a presentation.
•
Select Enabled to require meeting participants to log in to the device.
•
Select Disabled if you do not require meeting participants to enter a code to
log in.
Click Send to apply your settings.
Click Cancel to return to the previous settings.
Device Setup
4
33