Figure 7 Main Screen; Main Screen; Download And Install The Wpa-1000 Utility; Table 3 Projector Standby Screen - ZyXEL Communications WPA-1000 User Manual

Projector Standby Screen
Table 3
LABEL
Login Code
Resolution
Channel
Device Name This is the name given to the WPA-1000. This name is displayed
Network Type This is the wireless mode for the WPA-1000. It can be either AP
WEP
Server IP
ESSID

2.4 Main screen

Connect your computer to the WPA-1000 and open the web configurator (see the Quick Start
Guide for instructions). The main screen appears. Use this screen to download the WPA-1000
utility and to configure administrator settings.

Figure 7 Main Screen

2.4.1 Download and Install the WPA-1000 Utility

See the Quick Start Guide for instructions on downloading and operating the projection utility.
WPA-1000 User's Guide
DESCRIPTION
Use this four digit number to log in to the WPA-1000 utility.
The WPA-1000 supports a screen resolution of 1024 * 768.
This is the wireless channel used by the WPA-1000 to connect to
other wireless devices. To connect with each other, all wireless
devices must be set to the same channel. The default channel is
1.
in the user's WPA-1000 utility when a user tries to connect to it.
mode (default) or Infrastructure mode. Use AP mode to
connect wirelessly to the WPA-1000 directly or use
Infrastructure mode to connect to the WPA-1000 via another
AP.
This shows the security mode. It shows either Enable or Disable.
This is the current IP address for your WPA-1000. It's default is
192.168.1.10. If this value is not available it is 192.168.1.5.
This is the ID for this device used for wireless search and login.
Chapter 2 WPA-1000 Connections
27