Figure 20 Support Cd; Projection Problems - ZyXEL Communications WPA-1000 User Manual

Chapter 6 Troubleshooting
1 Make sure the wireless LAN is enabled on the WPA-1000
2 Make sure the wireless adapter on your computer is working properly.
3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible
and supports the same wireless standard as the WPA-1000.
4 Make sure your computer (with a wireless adapter installed) is within the transmission
range of the WPA-1000.
5 Check that both the WPA-1000 and your wireless station are using the same wireless and
wireless security settings.
The link quality and/or signal strength is poor all the time.
1 Move your computer closer to the AP or the peer computer(s) within the transmission
range.
2 There may be too much radio interference (for example microwave or another AP using
the same channel) around your wireless network. Lower the output power of the AP if
your AP has this option and the WPA-1000 is in Infrastructure Mode.
3 Make sure there are not too many wireless stations connected to a wireless network.

6.3 Projection Problems

I cannot install the projection utility from my web browser.
1 Insert the support CD in the package into your CD-ROM.
2 Click "Setup", or you can find the setup.exe file in the directory of your CD-ROM and
then double-click it.

Figure 20 Support CD

3 The installation wizard appears.
44
WPA-1000 User's Guide