Removing A Device From A Powerline Network - ZyXEL Communications PLA4101 User Manual

Chapter 2 The RESET/ENCRYPT Button
Press the RESET/ENCRYPT button on both powerline devices (A and D, B and D or C and D) for
4
0.5 to 3 seconds to add powerline device D. This must be done within 2 minutes (120 seconds) of
pressing the RESET/ENCRYPT button on the PLA.
Figure 4 Adding More Powerline Adapters to Your Network
B
This sets up your powerline network between your powerline devices.

2.3 Removing a Device from a Powerline Network

Suppose you want to remove PLAs (C) and (D) from the following powerline network.
Figure 5 Removing Devices From an Existing Powerline Network
B
C
Press the RESET/ENCRYPT button on powerline device C for 5 to 8 seconds and then release it.
1
This disconnects C from the current network.
Press the RESET/ENCRYPT button on powerline device D for 5 to 8 seconds and then release it.
2
This disconnects D from the current network.
16
A OR B
C
A
D
A OR B OR C
PLA Series User's Guide
A
D