Page 2
WPA-1000 via web browser. The Presenter2 will be the second person to connect to WPA-1000. In this scenario, you also can learn how to be an administrator of WPA-1000 in order to assign the presenter to carry out screen projecting via WPA-1000.
Page 4
2. The default ESSID for WPA-1000 is “WPA-1000”. 3. Choose “WPA-1000” to connect. Via Wired Connection: 1. Connect crossover cable to WPA-1000’s Ethernet port from the computer’s Ethernet port. 2. When the LAN LED is on, WPA-1000 connects to the computer successfully. Install Projecting Utility: For the first time user, please follow instructions below to install projecting utility first.
Page 7
5. After installation, a shortcut (WPA-1000) will be placed on your desktop. 6. Reboot your computer. After successful installation and reboot of your computer, please double click the WPA-1000 short cut on desktop and a control panel will pop up.
Page 12
But on the system tray, we still can see the icon which means that the Presenter2’s computer now has been connected to the WPA-1000. 3. Presenter2 now have to wait for the administrator of WPA-1000 to assign him to the next person who is in line for screen projecting via WPA-1000.
Page 14
2. Enter the admin/admin as the user name and password 3. You can see the current status of the WPA-1000 in this screen. There are two users who connected to WPA-1000 and one of them is doing screen projecting now.
Page 16
In this scenario, Presenter1 is the user who has the computer name TWNB12880 and doing the screen projecting. Moreover, Presenter1 is also the administrator of WPA-1000. Therefore, Presenter1 has the ability to determine who can do the screen projecting via WPA-1000.