Appendices And Index; Appendix A Product Specifications; Table 10 Hardware Specifications; Table 11 Firmware Specifications - ZyXEL Communications WPA-1000 User Manual

A
P P E N D I X
The following tables summarize the WPA-1000's hardware and firmware features.

Table 10 Hardware Specifications

Dimensions (W x D x H)
Device Weight
Power Specification
Ethernet Ports
Ports
Connector
Antenna
Transmission Rate
Frame size
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
Distance between the
centers of the holes (for
wall mounting) on the
device's back.
Recommended type of
screws for wall-mounting

Table 11 Firmware Specifications

FEATURE
Default IP Address
Default Subnet Mask
Default Password
DHCP Pool
Device Management
Wireless Functionality
WPA-1000 User's Guide
Product Specifications
190 x 130 x 33 mm
0.4kg
5 V DC 2A
Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Use crossover Ethernet cables.
One 10/100 Ethernet LAN port with RJ-45 jack
One VGA (D-sub 15 pin)
One external 2.95dBi antenna
Up to 20 frames per second
320 x 240
5º C ~ 40º C
0º C ~ 65º C
20% ~ 80% RH
5% ~ 95% RH
137 mm
M4 Tap Screw, see Figure 22 on page
DESCRIPTION
192.168.1.10
255.255.255.0 (24 bits)
admin
192.168.1.1 to 192.168.1.254
Use the web configurator to easily configure the rich range of features on
the WPA-1000.
Allow the IEEE 802.11b and/or IEEE 802.11g wireless clients to connect
to the WPA-1000 wirelessly. Enable wireless security (WEP) to protect
your wireless network.
A
54.
51