5.1.7 Security Setting
Choose the operation mode you required, and then enter "Security Setting" by clicking the Setup button next to
it and the following page will be displayed. This section allows you to configure the wireless security settings.
Object
Select Encryption
Figure 5-8 Basic Settings – WISP
Figure 5-9 Security Settings
Description
Select the encryption that you need.
None: No security required
WEP: Input 5, 13 (ASCII) or 10, 26 (HEX) character for WEP
key.
WPA: Enter ASCII characters between 8 and 63 character or 8
to 64 hexadecimal characters.
WPA2: Enter ASCII characters between 8 and 63 character or
8 to 64 hexadecimal characters.
WPA-Mixed: Enter ASCII characters between 8 and 63
character or 8 to 64 hexadecimal characters.
-38-
User Manual of WNAP-7325/WNAP-7335