Battery Type Selection - Pro-Tronik PTR-6A User Manual

10 FUNCTIONS
2 CARACTERISTIQUES
1 – 6  Flaps to Ailerons mix (Only when the FLAP mix is enabled)
a/ From the 1 – 6 mix screen, press the EXIT button to enter the flaps to Aileron mixing ratio setting.
3.2/ Press UP or DOWN to adjust the mixing ratio upward or downward (positive or negative depending on the
model configuration).
4/ Press the ENTER key to save your selection and EXIT to return to the main screen.

10.5 BATTERY TYPE SELECTION

1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key 4 times to select the LOW POWER functionality (low battery)
2/ Press one of the keys UP or DOWN to display the type of battery you want to use from :
 4 Ni-MH Cells  4c.MH (default suitable value for the battery supplied with your transceiver)
 1 LiPo Cell  1c.LP (suits the use of LiPo 1S)
 2 LiPo Cells  2c.LP (suits the use of LiPo 2S)
3/ Press ENTER to save your selection and then EXIT to return to the main screen.
10.6 BINDING PROCEDURE
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key five times to select the "BIND" feature. The screen appears as :
BIND feature
3/ Press the UP or DOWN button to activate pairing mode between the transmitter and the receiver (read the detailed
procedure described at the beginning of this manual). The display will show dashes scrolling from left to right.
4/ Once the pairing process is complete, press the EXIT button to interrupt BIND mode.
5/ Press the EXIT button to return to the main screen.
EXIT
UP/DOWN
UP/DOWN
UP/DOWN
i
UP/DOWN
UP/DOWN
Ailerons move in the same
direction (Flaps) when the CH6
switch is activated (set up)
42