Country Selection - Pro-Tronik PTR-6A User Manual

8 COUNTRY & STICK MODE SETTING
2 CARACTERISTIQUES
If the MODE button is set to MODE 2, you can choose between Mode 2 and Mode 4.
4/ Press the EXIT button to save your setting and return to the MODE / COUNTRY screen menu.
5/ turn your transmitter OFF.
8.2 SETTING THE STANDARD OF EMISSION
Your transmitter allows you to select the emission standard in order to be in accordance with the regulations. You can
choose between the international standard (letter I) and the French standard (letter F).
PROCEDURE
1/ hold the ENTER and EXIT keys pressed simultaneously then turn the transmitter ON
2/ Once in the MODE / COUNTRY menu, press the EXIT button to enter the COUNTRY sub-menu
3/ Finally press UP or DOWN keys to select the emission standard for the country in which you use your set.
4/ Press the EXIT button to save your setting and return to the MODE / COUNTRY menu.
5/ turn your trnasmitter OFF.
It is imperative to respect strictly the current standard in the countries in which you operate your radio control
!
system. Non compliance with regulations makes you incur useless risks.
To avoid limitation of power and therefore limited risk, the transmitter is designed to always emit at rated
i power that you have selected.
Thus, International norm, all channels of the 2.4 GHz band are used to transmit power rate that you have
selected.
Norm in France, only 100 mW authorized channels are used, but their power is equal to your selection. 10mW
limited channels are not used.
UP/DOWN
UP/DOWN
37