Mix - Pro-Tronik PTR-6A User Manual

10 FUNCTIONS
2 CARACTERISTIQUES
4/ Press the EXIT button to select channel 2 (CH2) and repeat steps 2 and 3 to adjust the travel of channels 3 and 4. EXIT
button to select the channel to be adjusted.
5/ press ENTER and then EXIT to return to the main screen and use the selected model memory.
10.4 MIXES
Your transmitter offers 4 types of different mixes, identified by the numbers of the mixed channels.
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key 4 times to select the "MIX" feature. The screen indicates that no mixing is enabled(OFF).
MIX feature
3/ Press the UP or DOWN key to activate one of 3 mixes available from :
 1 - 2  « Delta » for tailerons equipped models (Elevator and Ailerons features are mixed)
2 - 4  « V-Tail » for V-tail equipped models (Elevator and Rudder features are mixed)
1 – 6  « Flaps » for wings equipped with 2 servos
UP/DOWN
UP/DOWN
The mixing ratio between
i
channels 1 and 2 is factory set to
respond better to the classic
needs
The mixing ratio between
i
channels 2 and 4 is factory set to
respond better to the classic
needs
When mixing Flaps is enabled, the
i
mixing ratio gives Ailerons Flaps
default is set to 0% (off). The CH6
switch is inactive. However, it is
possible to program a mix
component by moving the two
ailerons in the same direction.
41