Model Memory; Memories Names; Dual Rates And Expos - Pro-Tronik PTR-6A User Manual

10 FUNCTIONS
2 CARACTERISTIQUES
Once the ENTER key is pressed, the menu screen is displayed and features :
10.1 MEMORY SELECTION
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press one of the UP or DOWN keys to scroll through the 1 to 8 memory.
3/ Once the desired memory number is displayed, press ENTER and EXIT to return to the main screen and use the
selected model memory.
10.2 MEMORY NAME
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the EXIT button to select one of the four letters of the name of the current memory. Letter flashes. EXIT button
to select the character to adjust.
3/ Press the UP or DOWN keys to scroll through the characters from the 28 available.
4/ Once the desired character is displayed, press EXIT to select the next letter in the model name and repeat steps 2 and
3 until the model name on the 4 characters.
5/ Press ENTER and then EXIT to return to the main screen and use the selected model memory.
10.3 CHANNELS DIRECTIONS
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key two times to select the "REVERSE" feature. The screen appears as follows (channel 1 is
automatically selected) :
REVERSE feature
3/ Press the UP button to reverse the direction of travel of the channel 1 servo(CH1).
4/ Press the DOWN button to select channel 2 (CH2) then repeat steps 3 and 4 until set the direction of travel of each
used channel. DOWN button to select the channel to be adjusted.
4/ Press the ENTER key 5 times to save your settings and return to the main screen.
10.3 DOUBLE THROWS (DUAL RATES)
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key three times to select the "D / R" feature. The screen appears as follows (channel 1 is automatically
selected) :
D/R feature
3/ Press the UP or DOWN buttons to adjust the rate of travel of channel 1(CH1).
You can keep your finger to continuously cycle the value.
i
The effect of the setting is immediately visible on the concerned servo.
The reduced travel is obtained when the D / R inter is set downward.
ENTER
UP/DOWN
UP
UP/DOWN
40