Oldsmobile 1995 Cutlass Supreme Owner's Manual page 87

To Set Cruise Control To Resume a Set Speed
1. Move the cruise control switch to ON.
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don't need to reset it.
Once you're going about
25 mph (40
km/h)
or more,
you can move the cruise
control switch from ON to
R/A (Resume/Accelerate)
for about half a second.
You'll go right back up to
your chosen speed and stay
there.
2. Get up to the speed you want.
3.
4.
Push in the SET,button
at the enid of the lever
and release it.
Take your foot off the
accelerator pedal.
To Increase Speed While Using Cruise Control
There are two ways to go to a higher speed. Here's the
first:
,.
1. Use the accelerator pedal to get to the higher speed.
2. Push in the SET button, then release the.button and
.the accelerator pedal. You'll now cruise at the highe
speed.
2-29