To adjust the HUD so you can see it properly:
1~. Start your engine and turn the HUD d i m e r dial all
the, way up.
When the headlamps are off, the HUD image will
When the headlamps
are on, the HUD image
be at a preset daytime brightness.
brightness is controlled by the dimmer dial.
2. Adjust your seat, if necessary, to a comfortable
position.
'
3. Press the up arrow on the image switch until the
HUD
image stops moving. Then press the down
arrow until the image is as low as possible but in full
view.
4.
Turn the
HUD
dimmer dial down until the
HUD
image is no brighter than necessary. To turn the
HUD
off, turn the dial all the way down.
If the sun comes out, it becomes cloudy,
or if you turn
on your headlamps, you may need to adjust the
HUD
brightness again. Polarizing sunglasses could make the
HUD
image harder to see.
2-56