Table of Contents
Advertisement
A " :
Press this button to play the radio when
a
tape
is playing. The tape will stop but remain in the player.
TAPE: Press this button to change to the tape function
when the radio is on. A box will appear around
TP
on
the display when the tape is active.
EJECT: Press this button to remove the tape. The radio
will play.
Cln: This message may appear on the display. If it does,
your cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it.as soon as possible to
prevent damage to your tapes and player. See "Care of
Your Cassette Tap,e Player" in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the Cln indicator.
"-
-
-"
will appear in the display
to show the indicator was reset.
k?
I
'
b
Playing a Compact Disc
Insert a disc partway into the slot, label side up. The
player will pull it in. If the ignition is on, but .the radio is
off, the disc will begin playing. If
YOU
want to insert a
disc,,when ,the ignition is off, first press EJECT.
If you're driving on a very rough road, the disc may not
play and ERR may appear on the display. The disc
should play when the road gets smoother.
If ERR
appears on the display and the disc comes 'back out, it
could be that:
The disc is upside down.
3-13
Advertisement
Table of Contents
